Thank you for using EasyGerb (AutoCAD to Gerber Conversion).  EasyGerb is unique because it runs directly inside of AutoCAD and outputs gerber files faster than you can export a DXF file.  Here's an online movie showing how to quickly load EasyGerb into AutoCAD, configure EasyGerb, and convert to Gerber. See Link:

(1) If you haven't done so already, download and Install EasyGerb.

(2) Loading EasyGerb Inside AutoCAD

Since EasyGerb is a plug-in for AutoCAD, so it must be loaded into the AutoCAD environment before it can be used.  EasyGerb is installed into the folder (typically "C:\Numerical Innovations\EasyGerb\"). There is one EasyGerb ARX file for each version of AutoCAD. The EasyGerb file name indicates the release of AutoCAD that it has been designed for.

Please be sure to use the EasyGerb ARX file that corresponds to your version of AutoCAD.

EasyGerb2000.arx    -> AutoCAD 2000
EasyGerb2002.arx    -> AutoCAD 2002
EasyGerb2004.arx    -> AutoCAD 2004
EasyGerb2005.arx    -> AutoCAD 2005
EasyGerb2006.arx    -> AutoCAD 2006
EasyGerb2007.arx    -> AutoCAD 2007
EasyGerb2008.arx    -> AutoCAD 2008
EasyGerb2009.arx    -> AutoCAD 2009
EasyGerb2010.arx    -> AutoCAD 2010
EasyGerb2011.arx    -> AutoCAD 2011
EasyGerb2012.arx    -> AutoCAD 2012
EasyGerb20XX.arx    -> AutoCAD 20XX
EasyGerb2008_64.arx    -> AutoCAD 2008 (64-bit)
EasyGerb2009_64.arx    -> AutoCAD 2009 (64-bit)
EasyGerb2010_64.arx    -> AutoCAD 2010 (64-bit)
EasyGerb2011_64.arx    -> AutoCAD 2011 (64-bit)
EasyGerb2012_64.arx    -> AutoCAD 2012 (64-bit)
EasyGerb20XX_64.arx    -> AutoCAD 20XX (64-bit)

XX - Corresponds to future versions of AutoCAD

To load EasyGerb into AutoCAD please follow the steps listed below:
 A. Select "Load Application..." from "Tools" menu or enter the "APPLOAD" command.
-This will activate the dialog "Load/Unload Applications"
 B. Select location of the EasyGerb ARX file: EasyGerb20XX.arx (XX is the AutoCAD version you are using)
 C. Click "Load" to load EasyGerb into AutoCAD.
 D. Click "Close" to exit.
 E. To start EasyGerb Type (at the command prompt): "EasyGerb"
-This will start "EasyGerb"

Note: Loading EasyGerb can be a one time process if you place EasyGerb.arx into your AutoCAD "Startup Suite". The next time you run AutoCAD, EasyGerb will automatically load itself.

(3) Go to EasyGerb menu: File | Enter License Key...

(4) To get your permanent License Key, press the button "Get Permanent Key...", and fill out the form.  A license key will be e-mailed to you shortly afterwards.

NOTE:   Should any technical or licensing questions arise, contact our support team:

We strongly encourage you to participate in our Support Center. Many questions you have may be instantly answered, please visit: